Connect with us

Tech

How to Fix Undoing Changes Made To Your Computer Windows 10

Published

on

Windows 10 update itself is useful for maintaining the performance of the OS we use, reducing bugs, and getting the latest features.

Windows updates themselves have advantages and disadvantages.

The drawbacks that I feel really, eat up a lot of internet quota hehehe.

Suddenly the internet quota ran out, it turned out to be used to update windows 10 on my laptop.

Causes of Undoing Changes Made To Your Computer Windows 10

I’ve also had an experience with Windows 10 update problems like the one above.

The story is that when I was updating Windows, I didn’t check the battery anymore.

Usually Windows 10 updates don’t take too long.

It’s just because this update may be a lot, so the update may take up to an hour or more.

I just live the laptop in a state of updating windows.

When I wanted to turn on my Lenovo laptop, it turned out that the battery had run out.

I charge then I turn on the laptop.

And on the black screen or on the black screen of the laptop, the notification ” Undoing Changes Made To Your Computer ” appears .

Why is this happening?

Apparently, because during the update process, the laptop died because it ran out of battery.

Supposedly, while the update process is in progress, the laptop should not turn off.

If the laptop is off, a notification will appear above.

How to Overcome Undoing Changes Made To Your Computer

The meaning of undoing changes made to your computer on a laptop black screen is more or less :

” Undo changes that have been made to your computer “.

Before the computer died, there were changes in Windows 10 due to an update.

But the update is not perfect, the computer is dead.

Then a notification will appear to cancel the changes that have been made on the black screen of the computer when it is turned on.

I’m not panicking about it, because I know the cause.

What am I doing?

I just let the status run and I didn’t do anything with my laptop.

How Long to Wait for Undoing Changes to be Made To Your Computer?

I leave it and just wait for about 30 minutes.

Thank God after that the laptop opened normally without any problems.

So, undoing changes is the process of returning the computer to its original state before updating windows which failed because the laptop was turned off.

For example, when the windows update process has reached 80%, the laptop is dead, then the update failed.

When the computer is turned on, the computer will return the 80% update to the state before the update.

So, if the percentage of updates is already large, it usually takes longer to wait for the undoing changes process.

Like me, waiting up to 30 minutes.

Just leave it alone, the computer is back to normal.

So no need to panic.

Other Solutions for Overcoming Undoing Changes Made To Your Computer

If after a long time it turns out that the computer or laptop is not working normally, you can do the following:

Asus Laptops

  1. long press the esc key.
  2. after that wait until the laptop screen restarts.
  3. then it says “BIOS upgrade is processing, don’t turn off your computer”.
  4. Wait until the bios upgrade process is complete.
  5. when finished it will say “update successfully, system will be reset”.
  6. Wait again for the process until the laptop opens normally.

Acer Laptops

  1. Press the power button for a few seconds to turn off the laptop.
  2. Press the power button again to turn on the laptop.
  3. after that long press the ESC key to display the boot menu.
  4. select system recovery > troubleshoot.
  5. select advanced options > Startup Settings > Restart tutorial how to solve undoing changes made to your computer
  6. select Enable safe mode.
  7. the laptop will open in safe mode.
  8. Furthermore, if you don’t want automatic updates, you can disable automatic Windows 10 updates so that this incident doesn’t happen again.

To display the boot, different laptops have different keys.

Some use ESC, F2, F4, F5, F9, F10 and F12 so please adjust it to your laptop.

Conclusion

If I was alone at that time I just let it go and it turned out that after that it was normal.

I just turned on the power.

However, we must be patient to wait because the process is indeed long.

So, just wait patiently.

Those are the causes and solutions for how to deal with undoing changes made to your computer when the Windows 10 update fails.

 

Continue Reading
Click to comment

Leave a Reply

Your email address will not be published.

Tech

Tips for the expert: Repair electrical appliances yourself

Published

on

By

Index

In this throw-away economy, it’s always tempting to buy something new as soon as something breaks. Do not! Repairing electrical appliances yourself saves a lot of money, and you also learn something from it. In this article we help you on your way with some tips.

If a device no longer works properly (or does not work at all) and if you cannot quickly find out what the problem is, Google is your best friend. A search with ‘brand name + type number + problem / error code’ in most cases quickly leads to messages from others who have encountered this before.

Almost all appliances sold in the Netherlands are also for sale in Germany with the same type designations. And because the market there is larger, more devices break and there is a greater chance that a user has reported something about this and may have devised or found a solution by now. You can also search for yourself on sites such as selbst.de , gutefrage.net or the electronicwerkstatt.de forum .

Also, don’t forget YouTube. There are now also thousands of videos on YouTube of people showing solutions for common malfunctions of household appliances. Especially with regard to washing machines, dishwashers, dryers and other white goods, problems and solutions are often generic and not tied to a particular brand.

Specialized sites and forums

Highly recommended is iFixit . On this site you will find manuals for repairing thousands of – mainly electronic – devices, including supplies and how difficult the repair is. Separate disassembly descriptions can even be found for devices that are difficult to disassemble. As a user, you are encouraged to describe and share your own repair. And yes, even a guide has been made for how you can do that best.

Certainly with older devices or devices that have been produced in small series, you may not immediately find a description of your problem or solution. In such cases, we recommend that you look for more specialized online places where the real enthusiasts hang out, such as a forum. And if there is no ready-made answer, you can also ask your question here, such as at Question & Answer on our site. A few other recommendations are superuser.com (hardware and software), hififorum.nl (audio equipment), autoweek.nl/forum/ (cars), doenidee.nl/forum / (devices in and around the house), gathering. tweakers.net (electronics + computers) andforum.zoom.nl (cameras).

Find manuals

There is a manual with almost all devices, but this often only helps you with solving small and easy-to-solve malfunctions and problems. Fortunately, there are many sites on the internet where you can also find extensive (technical) manuals, search with the terms ‘service manual’ and ‘repair manual’. This often contains diagrams and describes how to carry out the most common repairs and – perhaps more importantly – what the type numbers are of the parts that you may have to order for this.

Good sites for finding these types of manuals include user manual.com , suche-anleitung.de , manualsdir.eu , devicemanuals.eu , nodevice.com , tradebit.com and eserviceinfo.com . Keep in mind that at some of these sites (service) manuals can only be downloaded for a fee. Incidentally, they are also exchanged via the various forums that have already been discussed. You will probably lose a little more time in that case.

A few additional tips. Have you not been able to find a service manual with parts list and/or part numbers? In most cases, you can also find the number on the part that needs to be replaced, especially for white goods and brown goods. Do you have the correct number but the part is not available? Please contact the correct parts supplier. They often know if there is another part that you can also use.

Parts & Tools

If you know what is wrong with a device, you will in certain cases need new parts and sometimes special tools. The trade in parts is growing enormously and many suppliers now also offer all kinds of how-tos as a service. In some cases, you will receive a credit or discount when the performance of your own repair films or photographs and offers that registration on that particular site.

For inspiration, we list a number of interesting ones: conrad.nl (electronics and tools), fixjeiphone.nl (iPhone and iPad), replacedirect.nl (including computer, household, tools) , partsshop.nl (including kitchen, household, garden) , parts.nl (including white goods and brown goods) and handyman.nl (eg computer, household, bicycle).

Order parts from abroad

In addition to the many sites where you can buy new, it is especially interesting for computer and notebook parts to see what is offered in terms of ‘refurbished’, ‘replacement parts’, and ‘pre-owned’. Sometimes you simply have no other choice or new is much too expensive.

Ebay is a great place to start looking for used parts. If that doesn’t work, aliexpress.com and alibaba.com often offer a solution. Especially in China there is a lively trade in used computer, tablet and smartphone parts. Sellers go to great lengths – albeit in poor English – to help you if you can’t find the right part or alternative yourself. If you have it sent by regular mail, it can take a few weeks from China before you receive a part.

Also pay attention to the shipping costs and any other surcharges. For purchases outside the EU and above 22 euros you pay VAT (21%). If the value is above 150 euros, you will have to pay customs duties to the delivery person. The amount depends on various factors. Before you order something, take a look at the sites of the tax authorities and customs.

With a little daring and a manual or instructions from the internet you can go far, even if you have two left hands. In certain cases, however, it stops because you cannot figure out the problem yourself or because you do not know, for example, which tools or which parts you need.

Continue Reading

Tech

Refrigerator repair: Fix common problems yourself

Published

on

By

A refrigerator that no longer works properly can cause problems. There are various food items in it that must remain refrigerated. When the refrigerator no longer works properly, this can cause the food to spoil and everything can therefore be thrown away. The refrigerator should be repaired as soon as possible, but you do not necessarily have to call in a mechanic. You can also solve many problems yourself. Parts.nl tells in this article how you can solve the refrigerator problems yourself.

The refrigerator no longer cools

A very annoying problem that can often have multiple causes. It is important to see what still works well. If the compressor or motor still starts, this means that the thermostat still sends a signal that the engine must start. The coolant is then no longer pumped around due to another cause, which may be due to a leak in the cooling system or a blockage. Unfortunately, this is no longer worth repairing unless it is still under warranty.

If the engine does not start, the refrigerator thermostat is faulty. This can be the thermostat that you set manually or an electronic thermostat that is connected by a wire to a sensor (NTC). The manual thermostat will in many cases have to be replaced and it is often located on the right side of the refrigerator behind the rotary knob. When you take the thermostat out you will probably see the type or serial number. You can use this to order new parts for your refrigerator yourself.

With an electronic thermostat, you need to check the temperature on the display and see if it shows the actual temperature of the refrigerator. If so, then the NTC is faulty. If the temperature differs greatly, the electronics are probably broken. You can also order parts for this online and try to solve the problem yourself.

freezer compartment defrosts

In this case, the refrigerator may be in a room that is too cold. When the temperature in the environment is colder, the engine needs to start less often. You often encounter this in the winter period. So when the engine no longer starts, the freezer compartment is no longer cooled and it defrosts. Therefore, do not place the refrigerator in an environment of 10 degrees or lower.

Water under the fridge

A refrigerator is equipped with an automatic defrosting system, which ensures condensation drainage. Refrigerators condense on the back, causing the water to run down to the gutter. If the gutter is clogged, the water can no longer drain away, so you get water in the refrigerator. To unclog, carefully pierce the hole.

Preventive maintenance prevents problems with the refrigerator

In addition to solving defects, preventive maintenance can also be useful. If the rubbers of the refrigerator are kept clean, they will last longer. This provides a better seal and is better for power consumption. Also regularly defrost the freezer compartment so that ice does not form. As a result, the NTC will not break and can continue to transmit the signal to the motor of the refrigerator.

For example, a refrigerator repair does not have to be complicated and expensive. The costs of a mechanic can easily be saved by carrying out the repair yourself. For this you simply order the refrigerator parts for the refrigerator online and you can quickly get started repairing the refrigerator.

Continue Reading

Tech

Managing the waste flow of plastic is important, also with storage bins.

Published

on

By

The ecology of a changing world… With a properly functioning waste stream and new recycling technologies, the amount of recycled plastic can be increased enormously. In the longer term, this is important for online purchases that will be shipped with reusable packaging, such as nestable distribution bins.

Plastic waste can be recycled very well if this old plastic is sorted and does not end up in the residual waste. That is why effective plastics recycling is one of the biggest challenges. Every day huge amounts of plastic waste end up in nature, in landfills, in the oceans and also as microplastics in our food chains. Huge carpets of plastic waste float in the oceans. An example of this is the Great Pacific Garbage Patch, which is now three times the size of France and contains 1.8 trillion plastic parts, or 250 for every inhabitant on the planet. It is the largest garbage dump on our planet. This fact underlines once again the importance of establishing well-functioning recycling systems and effective recycling of plastic.

Only 16 percent of plastic waste is recycled

Only 25 percent of plastic waste is recycled. Worldwide it is even less. But according to one study, official recycling rates are relatively high, reaching 45 percent according to the study. However, these figures only refer to deliveries to recycling companies, not the total amount actually recycled. In addition, manufacturers, including storage bins, have until now tended to use virgin plastic granulate for their products instead of recycled material, which is often a mix of colors.

The low price of new plastic and the expensive sorting and reconditioning of used plastic in Europe have led to a large proportion of plastic waste being shipped abroad. According to these data, Germany is the third largest exporter of plastic waste in the world after the US and Japan. However, the main importing countries to date, China and Malaysia, have imposed import bans or extremely limited quantities purchased. The study’s authors describe the planet’s pollution with plastic as one of the greatest environmental crises. “At current and projected growth rates, plastic production will emit 52.5 gigatons of carbon dioxide by 2050.

There is an urgent need for function cycles and new technologies

It is therefore urgent that much more plastic is recycled and reused for new products. To achieve this, the recycling cycles have to work in a real and global way. In addition, new effective processes need to be developed for the recycling of plastic, so that manufacturers are happy to use granulate from recycled plastic.

Diversity of recycled plastic raw materials is increasing

Although the problem of waste still exists, there is a much greater variety of raw materials (ground and recycled materials) on the market today than ten years ago. In the past, companies have only ground their own production waste or customer returns and immediately reused that material. This is then called ground material.

Reclaimed plastics are recycled plastics that are first ground and then melted. Alternatively, the material is sorted, melted, added and reconstituted. Compounding is the addition of aggregates (fillers, additives…) to obtain the desired properties. Depending on the origin, a distinction is made between post-consumer raw materials and post-industrial raw materials.

New processes for plastics recycling

There are already companies that have perfected complicated plastics recycling (mostly polyethylene (PE) and polypropylene (PP)) and compounding of post-consumer recyclables so that plastics recycling can be offered according to the demands of the market.

Because the production of plastics does not always have to be based on crude oil. Due to the precise sorting and the optimized separation, degassing and filtration, a particularly high purity of the plastic granules can be achieved during recycling.

Special recipes and processes make it possible to adapt these according to need in terms of fluidity, stability, UV and heat resistance or coloring. Users or manufacturers of plastic products can also apply for an environmental label and thus distinguish themselves positively from the competition. Significant amounts of greenhouse gases are saved in the production of the recycled products and in addition, the upcycling is carried out by using it as a sustainable plastic product. Cheap disposable items are thus converted into high-quality items that replace many disposable products due to their durability.

Research is currently underway into chemical recycling, which will allow plastics for which no recycling solutions currently exist to be recycled, in addition to mechanical recycling. Plastic waste is converted into raw materials or monomers, for example by thermochemical processes, hydrolysis or solvolysis.

The resulting starting material can be used for the production of new plastics. Examples include contaminated plastics, multi-layer food packaging or composite plastics for the automotive and construction industry. The method uses thermochemical processes to convert plastic waste into raw materials (pyrolysis oil). This makes it possible to produce high-quality plastics, for example for packaging.

Upcycling with BITO bins

In the case of reusable use, it is essential to ensure that the recycling cycle really works well, as with BITO reusable storage bins and transport bins. These are made of environmentally friendly recyclable plastic (PP granulate). Moreover, at the end of their life they do not produce unnecessary waste, but are ground and this material is then used to produce new articles. There are many options for realizing reusable and deposit systems with matching plastic containers made of high-quality recycled material. BITO reusable boxes are extremely durable. At BITO, the customer receives a five-year warranty on every storage bin. The MB reusable distribution box has more than 300 cycles. This means that 300 disposable packaging is saved per distribution container. There is a closed raw material cycle for the trays. BITO also uses processed recycled plastics or other recycling systems from around the world on request. This increases the share of plastic waste that is recycled as a raw material. With these BITO storage bins you are upcycling in a particularly environmentally friendly way.

Literature:

1 Only a fraction of plastic waste is recycled, Zeit Online, 6.6.2019

2 Plastic Atlas 2019, Facts and figures about the world of synthetic polymers, Federation for Environment and Nature Conservation Germany (Bund) and Heinrich Böll Foundation, Berlin, 2019

3 ChemCycling: Henkel and Alpla present a special Perwoll bottle, Packaging Journal, October 21, 2019

 

Continue Reading

Recent Posts

Manhuaus Manhuaus
Uncategorized3 weeks ago

Manhuaus

Are you looking for information on Manhuaus? You have come to the right place! In this blog post, we will...

Entertainment4 weeks ago

쿠쿠티비

If you are looking for 쿠쿠티비? Then, this is the  right place where you can find some excellent sources that...

Entertainment4 weeks ago

Togelon

If you are looking for Togelon? Then, this is the  right place where you can find some excellent sources that...

y2mate y2mate
Entertainment4 weeks ago

Y2mate

If you are looking for Y2mate? Then, this is the  right place where you can find some excellent sources that...

Soap2Day Soap2Day
Entertainment4 weeks ago

Best Soap2Day to Alternatives 2022

Are you looking for information on how to watch movies on soap2day? You have come to the right place! In...

Soap2Day Soap2Day
Entertainment4 weeks ago

Soap2Day

Are you looking for information on how to watch movies on soap2day? You have come to the right place! In...

Business4 weeks ago

The Benefits of Creating an Online Presence for Your Dental Practice

As a dentist, you know that having a strong online presence is crucial to attracting new patients and growing your...

Health4 weeks ago

Tips for Choosing the Right Massage Therapy for You

There is nothing quite like a massage to help you relax and rejuvenate. Whether you’re looking for the best massage...

wpc2026 wpc2026
Games4 weeks ago

Wpc2026 Live Login Password

Are you looking for information on how to login to Wpc2026 Live? You have come to the right place! In...

Business2 months ago

5 Best Niche Perfumes for Him

Based on the premise that a person’s scent reveals information about how they are, what do you think would be...

Trending